Comments on: Product Review: Dura Fix makes Welding Repairs and Fixture Creation Easy http://www.cncreport.com/product-review-dura-fix-makes-welding-repairs-and-fixture-creation-easy/ The Premier Online Machining Magazine Thu, 19 May 2016 23:02:03 +0000 hourly 1 http://wordpress.org/?v=3.0.1 By: Eric BOUGEARD http://www.cncreport.com/product-review-dura-fix-makes-welding-repairs-and-fixture-creation-easy/comment-page-1/#comment-1025 Eric BOUGEARD Thu, 09 Jan 2014 15:08:15 +0000 http://www.cncreport.com/product-review-dura-fix-makes-welding-repairs-easy/#comment-1025 Hello, I need to repaer a hole in a VW Golf 4 gearbox carter. The hole is 20mm x 30mm would this materiel allow me to feel the gap and close that hole? The carter is made of aluminium alloy with the stamping "GD-TL023" on it. Will that materiel stick to it? Regards Eric Hello,

I need to repaer a hole in a VW Golf 4 gearbox carter. The hole is 20mm x 30mm would this materiel allow me to feel the gap and close that hole?
The carter is made of aluminium alloy with the stamping “GD-TL023″ on it. Will that materiel stick to it?
Regards
Eric

]]> By: jeff jaeger http://www.cncreport.com/product-review-dura-fix-makes-welding-repairs-and-fixture-creation-easy/comment-page-1/#comment-568 jeff jaeger Sun, 20 Nov 2011 18:49:37 +0000 http://www.cncreport.com/product-review-dura-fix-makes-welding-repairs-easy/#comment-568 i have a cracked aluminum rim at the beed. would this product fill the crack and stop the crack from spreading and possably causing a crash. i have a cracked aluminum rim at the beed. would this product fill the crack and stop the crack from spreading and possably causing a crash.

]]> By: Ed http://www.cncreport.com/product-review-dura-fix-makes-welding-repairs-and-fixture-creation-easy/comment-page-1/#comment-44 Ed Mon, 05 Oct 2009 19:28:27 +0000 http://www.cncreport.com/product-review-dura-fix-makes-welding-repairs-easy/#comment-44 From the description, I could weld brass nuts to aluminum flashing, right?? I would put a stainless steel bolt/screw into they so it wouldn't fill the hole so to speak. Can this be done? From the description, I could weld brass nuts to aluminum flashing, right?? I would put a stainless steel bolt/screw into they so it wouldn’t fill the hole so to speak. Can this be done?

]]>